# Removing the Top Rack End Caps on an Old GE Dishwasher
End caps hold dishwasher racks in place on the rails. Before you can take a rack out of the dishwasher, you will need to remove the end caps. Older models of General Electric dishwashers feature a particular mechanism that will release the end caps for easy removal.
Instructions
-
-
1
Turn off the electrical power to the dishwasher from the kitchen circuit breaker.
-
2
Open the dishwasher door.
-
3
Press the small indented button located on the left rail behind the end cap. This will release the end cap so that you can pull it off. Set the cap aside.
-
4
Press the button on the end of the right rail to disengage the second cap. Pull the end cap off the rail and set it aside.
-
5
Replace the end caps by pushing them back into place on the rails.
-
1
Dishwashers
- How to Install a GE Dishwasher Rack With Side End Caps
- How to Install the Top Rack of a GE Dishwasher
- How to Fix the Water Flow to the Top Rack of My KitchenAid Dishwasher
- How to Clean the Top Rack in a KitchenAid Dishwasher
- How to Remove the Top Rack From a Kenmore Dishwasher
- Removing the GE Dishwasher Top Rack
- How to Remove the Top Sprayer Arm on a GE Dishwasher
- Removing the Upper Rack in a GE Dishwasher
- How to Remove the Top Rack of a KitchenAid Superba
- How to Remove the Top Rack From a GE GSD1200G02 Dishwasher
- Reinstalling the Top Rack to a Dishwasher
- How to Remove the Top Rack on a KitchenAid Dishwasher
