The engine in the Homelite XL Chain Saw displaces 58.2 cc and has one cylinder. The bore is 1.8 inches and the stroke is 1.4 inches. The air filter is a cellulose fiber element, and the starter is a Homelite automatic rewind starter. The spark plug is a Champion CJ6, and the spark plug gap is .03 inches. It has a centrifugal clutch and direct drive.
The Homelite XL Chain Saw casing is made from die cast magnesium, and the cylinder is aluminum with a chrome-plated bore. The chain saw is designed to be operated by one person and has a rigid handlebar system.
The gas tank in the Homelite XL holds 24.2 ounces. It runs on regular octane gasoline. The oil pump is automatic but also has a manual override option. The fuel to oil ratio is 32 to 1. The recommended oil type is Homelite chain saw mix oil.
The chain on the Homelite XL is a Homelite Raker38 III and an Oregon 72. The chain pitch is 3/8 inch. Two guide bars can be used with this chain saw. The short guide bar is 16 inches long, and the long guide bar is 24 inches.