How to Fix a Broken Handle on a Frigidaire Microwave Model FMV157GC

The Frigidaire FMV157GC is an over-the-range microwave that combines a microwave and range hood in one appliance. The FMV157GC has 10 power settings and a power output of 1,000 watts and is available with a stainless steel finish. Unlike countertop microwaves that have a button to release the microwave door, the FMV157GC has a door handle, which is used to pull open the door. The door handle is secured using two screws, which are accessible through the inside of the door. If the door handle is loose, tighten the screws to secure it. If the handle is broken, remove the screws and install a new handle.

Flat screwdriver
Phillips screwdriver

Instructions

- 1
  Unplug the Frigidaire FMV157GC microwave from the wall outlet before beginning the repair. The power cord is often in the cabinet above the microwave.
- 2
  Open the microwave door and remove the plastic trim ring inside the microwave door. To remove, gently insert a flat screwdriver behind the ring and pry it off the door. Use extreme care when removing the trim ring to avoid cracking it.
- 3
  Tighten the door handle screws, if the door handle is loose.
- 4
  Remove the door handle screws and remove the door handle if the handle is broken.
- 5
  Align the new door handle with the screw holes and install the door handle screws to secure it to the door.
- 6
  Align the trim ring and press firmly to snap it back onto the door.
- 7
  Close the microwave door and restore the microwave's power supply.

How to Replace a GE Advantium Door Handle

How to Check a Microwave Seal

Microwave Ovens