How to Put a 3 Piece Shower Enclosure in

* 3-piece shower enclosure

* Level

* Tape measure

* Pencil

* Drill

* Screwdriver

* Caulk

* Utility knife

Instructions

1. Measure the shower area. Use the tape measure to measure the width and height of the shower area where the enclosure will be installed.

2. Mark the location of the shower enclosure. Use the pencil to mark the location of the shower enclosure on the wall.

3. Drill holes for the screws. Use the drill to drill holes for the screws that will secure the shower enclosure to the wall. Be sure to use the appropriate size drill bit for the screws you are using.

4. Screw the shower enclosure to the wall. Use the screwdriver to screw the shower enclosure to the wall. Be sure to tighten the screws securely.

5. Caulk the seams. Use the caulk to caulk the seams between the shower enclosure and the wall. This will help to prevent water from leaking out of the shower.

6. Cut the shower door to size. If necessary, cut the shower door to size using the utility knife.

7. Install the shower door. Follow the instructions that came with the shower enclosure to install the shower door.

Tips

* When choosing a shower enclosure, be sure to select one that is the appropriate size for your shower area.

* Before installing the shower enclosure, be sure to read and understand the manufacturer's instructions.

* If you are not comfortable installing the shower enclosure yourself, you can hire a professional to do it for you.

Troubleshooting

* If the shower enclosure is not level, use the level to adjust it until it is level.

* If there are any gaps between the shower enclosure and the wall, caulk the gaps to prevent water from leaking out.

* If the shower door does not fit properly, cut it to size using the utility knife.