How to Adjust the Hot & Cold Water in a Shower With Moen Mixing Valve

1. Identify the hot water heater. It is typically a cylindrical tank located in a utility closet, basement, or garage.

2. Check the temperature gauge on the water heater. This will give you an idea of the current temperature setting.

3. Locate the temperature adjustment knob or dial. It is typically located near the top of the water heater.

4. Turn the knob or dial to adjust the temperature. Turning it clockwise will increase the temperature, while turning it counterclockwise will decrease the temperature.

5. Allow the water heater some time to adjust to the new setting. It may take up to an hour for the water temperature to fully change.

6. Test the water temperature by turning on a hot water tap in a sink or shower. Adjust the setting as needed until you reach the desired temperature.

Here are a few additional tips for adjusting the hot water:

* If you have a gas water heater, you may need to adjust the gas input valve in addition to the temperature knob or dial.

* If you have a tankless water heater, the temperature adjustment process may be different. Consult the owner's manual for specific instructions.

* Be cautious when adjusting the temperature, as setting it too high can increase your risk of scalding.

* If you have small children, consider installing a faucet that has a built-in temperature limiter to prevent them from accessing hot water that is too hot.