How to Winterize a Fiberglass Pool

Before you can winterize your fiberglass pool, you need to make sure that it is clean. This means removing all of the dirt, debris, and leaves from the pool. You can do this by using a pool vacuum, a leaf skimmer, and a brush.

Step 2: Balance the Pool Water

The next step is to balance the pool water. This means adjusting the pH level, the alkalinity, and the calcium hardness. You can do this by using a test kit and following the instructions on the package.

Step 3: Add a Winterizing Chemical

Once the pool water is balanced, you need to add a winterizing chemical. This chemical will help to prevent the pool water from freezing and from damaging the pool liner. You can purchase a winterizing chemical at your local pool supply store.

Step 4: Cover the Pool

The next step is to cover the pool. This will help to keep the pool water clean and free of debris. You can use a pool cover that is specifically designed for fiberglass pools.

Step 5: Drain the Pool Equipment

The final step is to drain the pool equipment. This includes the pump, the filter, and the heater. You can do this by turning off the power and opening the drain plugs.

Tips:

* Be sure to follow the instructions on the package of the winterizing chemical carefully.

* If you have a solar cover, you may want to remove it before you cover the pool. This will help to prevent the solar cover from being damaged by the wind.

* If you live in an area where the winters are very cold, you may want to consider adding an ice eater to the pool. This device will help to keep the pool water from freezing.