How to Clean an Iron in Three Easy Steps

Step 1: Prepare the Iron

• Turn off the iron and unplug it from the electrical outlet. Allow it to cool down completely before cleaning.

Step 2: Clean the Soleplate

• If the soleplate has a non-stick coating, use a soft cloth or a special iron cleaning cloth soaked in water to wipe off any dust or residue.

- For tough stains, use a cotton swab dipped in white vinegar or rubbing alcohol to gently scrape off the grime.

- Avoid using abrasive materials that may damage the coating.

Step 3: Clean the Water Reservoir

• Open the water reservoir cap and pour out any remaining water.

• If there is build-up, rinse the reservoir with a mixture of one part white vinegar and two parts water to remove mineral deposits.

• Use a cotton swab or soft cloth to clean the nooks and crannies. After rinsing, make sure to leave the iron upright to drain any excess water.

Regular cleaning will keep your iron working efficiently and prevent stains or damage during ironing. If your iron has additional specific cleaning instructions provided by the manufacturer, always follow those recommendations for the best results.