Home Garden
# Home & Garden >> Housekeeping >> Cleaning Appliances

How Do I Attach Mini-Turbine Heads to a Dyson DC-14?

The Dyson DC-14 cleaner head features a rotating brush bar, whose bristles dislodge dirt and dust from the cleaning surface. When confined areas, such as car interiors and stair steps, makes use of the cleaning head difficult, a mini-turbine head attaches to the DC-14 wand or hose to provide increased cleaning capability.

Instructions

    • 1

      Attach the mini-turbine head to either the wand or hose. If selecting the hose, slide the wand out from the hose and set it aside. If choosing the wand, open the wand cap before sliding the wand up to its full length.

    • 2

      Orient the mini-turbine head onto the cuff at the end of the Dyson DC-14 wand or hose.

    • 3

      Press the mini-turbine head onto the hose or wand cuff. Rotate the mini-turbine head back and forth onto the cuff for a firm fit.

    • 4

      Turn the Dyson DC-14 mini-turbine head over and look for a button that slides back and forth. Not all mini-turbine heads possess this feature. If the button is present, set it in the direction of the single mark.

    • 5

      Turn the brush bar on the underside of the mini-turbine head on or off, depending on the type of cleaning desired. To disable the brush bar, locate the round button on the side of the mini-turbine head. Push the button in.

Previous:

Next:

Cleaning Appliances
  1. How to Attach Legs to a Desk
  2. How to Mount Multiple Heads on a Bridgeport Mill
  3. How to Attach a Sprinkler Head to a Pipe
  4. How to Attach a String Cutter to a Toro Brush Cutter
  5. How to Attach Roman Shades to a Wall
  6. How to Install a Dyson Belt
  7. How to Replace a Dyson Animal Soleplate
  8. How to Attach Attachments to a Dyson Animal
  9. How to Put a Battery on a Dyson Animal
  10. How to Attach a Swiffer Pad to a Roomba
  11. How to Prevent a Broken Sprinkler Head
  12. How to Harvest a Cabbage Head

Home Garden © https://www.98905.com