How to Fix an Exterior Door Handleset

A handleset is the combination of a doorknob or lever and a deadbolt lock. It's vital for keeping your home safe and secure. If your exterior door handleset is damaged, you can replace it yourself with a few simple tools.

Here's how to do it:

1. Gather your tools and materials.

You'll need:

A new exterior door handleset

A screwdriver

A drill

A level

A tape measure

Safety glasses

2. Remove the old handleset.

Use a screwdriver to remove the screws that hold the door handleset in place. There may be screws on both the inside and outside of the door.

Once the screws are removed, carefully remove the handleset from the door.

3. Measure the door.

Use a tape measure to measure the width and thickness of the door. You'll need this information to purchase a new handleset that fits properly.

4. Install the new handleset.

Start by inserting the deadbolt into the hole in the door. Make sure that the deadbolt is aligned correctly so that it will lock properly.

Secure the deadbolt in place with the screws provided.

Next, install the door handle or lever. Insert the handle or lever into the hole on the door. Make sure that the handle or lever is aligned correctly so that it will open and close smoothly.

Secure the handle or lever in place with the screws provided.

5. Test the handleset.

Open and close the door several times to make sure that the handleset is installed correctly.

Check the deadbolt to make sure that it locks and unlocks properly.

6. Enjoy your new exterior door handleset!

You've now successfully replaced your exterior door handleset. This simple update will help to keep your home safe and secure.