How to Repair Roof Shingles Lifted by Wind

Repairing roof shingles lifted by wind requires careful inspection, appropriate tools, and proper techniques to ensure a long-lasting fix. Here's a step-by-step guide to help you repair lifted roof shingles:

1. Safety First:

- Ensure your safety by wearing appropriate protective gear such as gloves, safety glasses, and a sturdy ladder.

2. Locate Damaged Shingles:

- Inspect your roof for shingles that have been lifted or damaged by wind.

3. Remove Damaged Shingles:

- Use a pry bar or shingle remover to carefully remove the lifted or damaged shingles. Be cautious not to damage the surrounding shingles.

4. Check the Underlayment:

- Inspect the underlayment beneath the lifted shingles. If it is damaged or torn, replace it.

5. Reattach Shingles:

- If the lifted shingles are still in good condition and not torn or cracked, you can reattach them.

- Apply roofing cement or adhesive under the lifted shingle and press it firmly back in place.

- Use roofing nails or staples to secure the shingle.

6. Replace Damaged Shingles:

- If the damaged shingles are beyond repair, you'll need to replace them.

- Slide a new shingle under the row above and overlap the shingle below, following the manufacturer's instructions for your specific shingle type.

- Secure the new shingle with nails or staples.

7. Seal Shingles:

- Apply a layer of sealant or roofing cement along the edges of the new or repaired shingles to prevent water infiltration.

8. Inspect and Clean:

- Once the repairs are complete, inspect the entire roof for any other damage or lifted shingles.

- Clean the roof's surface by removing debris and dirt.

9. Prevent Future Damage:

- Consider installing additional storm clips, hurricane straps, or other wind-resistant roofing products to prevent future damage.

Remember, if the damage is extensive, it's advisable to consult a professional roofing contractor to ensure a proper and safe repair.