How to Repair a Curling Roof Shingle

Curling roof shingles can be a problem for homeowners, as they can lead to leaks and other damage to the roof. Fortunately, repairing curling shingles is relatively simple and can be done with a few tools and materials.

Tools and Materials Needed:

- Ladder

- Utility knife

- Hammer

- Pry bar

- Roofing nails

- Roof cement

Instructions:

1. Inspect the Roof: Before starting, inspect the roof to determine the extent of the curling shingles. Make note of any other damaged shingles or areas that may need repair.

2. Pry Up the Curling Shingle: Use the pry bar to carefully pry up the curling shingle, being careful not to damage the surrounding shingles.

3. Remove the Nails: Once the shingle is lifted up, use the utility knife to remove the roofing nails that are holding it in place.

4. Apply Roof Cement: Apply a generous amount of roof cement to the back of the new shingle.

5. Replace the Shingle: Place the new shingle over the area where the old shingle was removed and press down firmly to ensure it is securely in place.

6. Nail the Shingle: Use the roofing nails to nail the new shingle in place, making sure to drive the nails through the shingle and into the roof sheathing.

7. Repeat for Other Shingles: Repeat steps 2-6 for any other curling shingles that need to be repaired.

8. Clean Up: Once all the repairs are complete, clean up any debris and inspect the roof to make sure it is properly sealed.

By following these steps, you can repair curling roof shingles and prevent further damage to your roof. If you are uncomfortable working on your roof or the repairs are extensive, it is best to contact a professional roofing contractor for assistance.