How to Install an Electrical Panel With Brackets

An electrical panel's job is to distribute the main power supply into individual circuits throughout the building. The panel also contains the electrical breakers which protect each circuit from excessive current that may damage the wires and cause fires. It should be installed in a location that is easily accessible, so you can turn off the power in an emergency. Consult your local building authority to understand all of the rules for electrical panel installation.

Pencil
Screwdriver
Level
Drill

Instructions

- 1
  Choose a location to mount your electrical panel that meets local laws. It should typically be easily accessible and at least 3 feet from a water source.
- 2
  Remove the cover from the electrical panel by loosening the four screws that secure it.
- 3
  Hold the supplied template against the wall and straighten using a level on its side and top. Mark the location of the mounting bracket holes on the wall with a pencil.
- 4
  Hold the two mounting brackets against the wall alighting their holes with the markings on the wall. Fasten with the drill and self tapping screws.
- 5
  Hold the electrical panel against the brackets and secure with the screws provided.

How to Install a Wiremold Metal Raceway

How to Stop Outlet Voltage Fluxtuations in Single Outlets

Electrical Repairs