How to Get a Broken Light Bulb Out of Microwave

1. Unplug the Microwave: Before you begin, ensure the microwave is unplugged from the power source to prevent any risk of electrical shock.

2. Allow Cooling: Let the microwave cool down completely if it has been recently in use. This is important for your safety and to avoid any burns.

3. Assess the Damage: Open the microwave door and examine the broken light bulb. If most of the bulb is still intact and no glass shards have scattered inside the microwave, you may be able to proceed with the removal process.

4. Wear Protective Gloves: Put on a pair of heavy-duty, rubber-coated gloves to protect your hands from any sharp glass fragments.

5. Remove Glass Cover (If Present): Look for a glass or plastic cover that might be protecting the light bulb. If there is one, try to remove it carefully without breaking it further.

6. Gently Pick Up Large Pieces: Use your gloved hands to pick up any larger pieces of the broken light bulb. Place them on a piece of newspaper or cardboard to prevent contact with surfaces.

7. Use Adhesive Tape: For smaller glass fragments, take a small piece of wide, heavy-duty adhesive tape and press it firmly over the area with the fragments. Gently lift to try and remove the fragments stuck to the tape. Be careful not to push the glass pieces deeper into the microwave.

8. Wipe the Inside: Once all visible pieces are removed, use a damp cloth to wipe the inside of the microwave where the bulb was located. This will help pick up any remaining small glass fragments.

9. Inspect Thoroughly: Look closely for any remaining glass pieces inside the microwave, paying particular attention to the bulb socket and the surrounding areas.

10. Proper Bulb Disposal: Carefully dispose of all the broken glass pieces by wrapping them in newspaper or cardboard and disposing of them in a designated "glass recycling" container or a trash bin lined with a plastic bag.

11. Replace the Bulb: Once you've removed all the glass fragments, you can replace the old bulb with a new one. Make sure the new bulb is compatible with your microwave model.

12. Test the Microwave: Plug the microwave back in and test it to ensure it's working properly before using it again.

Remember, handling broken glass can be dangerous, so always prioritize safety and work cautiously. If the bulb is shattered or the damage looks extensive, it's best to contact a professional appliance repair technician for assistance.