The overall size of the Harley Rake T-6 is 48 inches long by 81 inches wide. The roll back barrier can be set to a 1/8 inch distance from the roller up to two inches of space from the roller. The weight of the Harley Rake T-6 is 830 pounds, which helps it to break up tough soil. The rake is designed to have a three point attachment to the tractor and is powered off of the tractors PTO output.
The roller bar on the Harley Rake T-6 is covered with pure carbide teeth to provide the biting power needed to manipulate the ground that is being worked. The teeth on the roller turn over the ground as the rake is pulled and the operator can set the size of material that is okay to remain in the soil. Material that is larger than the set size will be brought along with the rake. A 14-inch clearance allows the rake to pass over debris in the yard, such as low stumps and rocks, without becoming snagged or damaged.
The Harley Rake T-6 has a raking width of 72 inches. The rake can be set at different angles if conditions call for it. With the rake set at a full angle, the raking width is reduced to 69 inches. The rake can be set up to a 15-degree angle from center. The angle of the Harley Rake T-6 can be designed to be set by hand or have hydraulic controls depending on the desire of the user and the capability of the tractor that is pulling the rake. This feature should be determined at the time of purchase because each Harley Rake T-6 is set for only one of the control types.
The Harley Rake T-6 is designed to assist landscapers with soil management. Soil can be difficult to work with if it has become overly wet or is uneven. The Harley Rake T-6 helps to turn soil so that it can dry and muddy sites can be exposed to the air. The two removal side panels of the Harley Rake T-6 provide the operator with the ability to control material and create windrow so the material can be removed from the property. Windrows up to 14 inches can be cleared by the Harley rake.