How to Build a Table Using an Angle Iron

- Angle iron (4 pieces, each 24 inches long)

- 2x4 lumber (4 pieces, each 32 inches long)

- Wood screws

- Drill

- Saw

- Tape measure

- Level

- Pencil

Instructions:

1. Cut the angle iron and 2x4 lumber to the desired lengths.

2. Assemble the angle iron frame by attaching the four pieces together with wood screws.

3. Attach the 2x4 lumber to the angle iron frame using wood screws.

4. Check the level of the table to make sure it is even.

5. Enjoy your new table!

Tips:

- Use a saw guide to ensure straight cuts.

- Predrill holes for the wood screws to prevent the wood from splitting.

- Sand the edges of the wood and angle iron to smooth out any rough spots.

- Apply a finish to the table to protect it from wear and tear.

Variations:

- You can use different sizes of angle iron and 2x4 lumber to create a table of any size.

- You can add additional support to the table by adding cross braces between the legs.

- You can customize the table by adding a shelf or drawer.