How to Remove an Eljer Wall Mount Urinal

1. Turn off the water supply. The water supply to the urinal is usually located behind the urinal. There may be a valve that you can turn off, or you may need to use a wrench to disconnect the water line.

2. Disconnect the drain. The drain for the urinal is usually located at the bottom of the fixture. There may be a coupling or a flange that you can remove, or you may need to cut the drain line.

3. Remove the bolts. The urinal is usually mounted to the wall with four bolts. Use a wrench to remove the bolts.

4. Gently lift the urinal off of the wall. Be careful not to drop the urinal.

5. Replace the gasket. The gasket is located between the urinal and the wall. If the gasket is damaged, it should be replaced.

6. Reinstall the bolts. Reinstall the four bolts that you removed in step 3.

7. Reconnect the drain. Reconnect the drain that you disconnected in step 2.

8. Turn on the water supply. Turn on the water supply that you turned off in step 1.

Additional Tips

- If you are unable to remove the bolts, you may need to use a bolt extractor.

- If the gasket is damaged, you can make your own gasket out of a piece of rubber or foam.

- Be sure to clean the area around the urinal before reinstalling it.