How to Set a Fresh Flower in Resin

Materials Needed:

- Fresh flower

- Resin (such as epoxy resin)

- Hardener

- Mixing container

- Stirring stick

- Disposable gloves

- Safety glasses

- Mold or container for the flower

Instructions:

Step 1: Prepare the Flower:

- Choose a fresh flower with petals that are in good condition.

- Remove any leaves or thorns that might be on the flower.

- Lay the flower flat on a paper towel to absorb any excess moisture.

Step 2: Mix the Resin:

- Put on your disposable gloves and safety glasses to protect yourself.

- In a mixing container, combine the resin and hardener according to the manufacturer's instructions.

- Stir the mixture thoroughly until it is well combined and there are no streaks or lumps.

Step 3: Add the Flower to the Mold:

- Place the mold or container you chose on a flat and level surface.

- Carefully arrange the flower in the center of the mold.

- Make sure the petals are spread out and not overlapping too much.

Step 4: Pour the Resin:

- Slowly pour the mixed resin over the flower.

- Be careful not to pour directly onto the flower, as this can cause air bubbles.

- Continue pouring until the flower is completely covered in resin.

Step 5: Remove Air Bubbles:

- Use a toothpick or bubble remover to carefully remove any air bubbles that might have formed on the surface of the resin.

Step 6: Let the Resin Cure:

- Allow the resin to cure completely according to the manufacturer's instructions.

- Curing time can vary from a few hours to a few days.

Step 7: Remove the Finished Piece:

- Once the resin has fully cured, gently remove the finished piece from the mold.

- If any excess resin has hardened on the surface, use a sharp blade or sandpaper to carefully trim it off.

Step 8: Display or Gift Your Artwork:

- Your beautiful preserved flower in resin is now ready to be displayed or gifted!

Tips:

- To create a more interesting effect, you can add other elements such as glitter, color pigments, or small decorative items to the resin before pouring it over the flower.

- If you möchten to preserve multiple flowers, you can arrange them in a pleasing composition within the mold before adding the resin.

- Experiment with different flower varieties and colors to create unique and stunning resin artworks.