How to Cap the Open End on Crown Molding

1. Use a miter saw to cut the molding at a 45-degree angle.

2. Make sure to cut the molding so that the long side is facing the wall and the short side is facing the ceiling.

Step 2: Apply Adhesive to the Crown Molding

1. Use a caulk gun to apply a thin bead of adhesive to the back of the crown molding.

2. Make sure to apply the adhesive evenly so that the molding will adhere properly.

Step 3: Position the Crown Molding

1. Carefully position the crown molding against the wall and ceiling, making sure that the 45-degree angle is facing outward.

2. Press the molding firmly into place.

Step 4: Secure the Crown Molding

1. Use a brad nailer to secure the crown molding in place.

2. Drive the brads through the molding and into the wall and ceiling studs.

Step 5: Fill the Nail Holes

1. Use a putty knife to fill the nail holes with wood filler.

2. Let the wood filler dry according to the manufacturer's instructions.

Step 6: Sand the Wood Filler

1. Once the wood filler is dry, sand it smooth using fine-grit sandpaper.

Step 7: Paint the Crown Molding

1. If desired, paint the crown molding to match the color of the wall or ceiling.

2. Let the paint dry completely before moving furniture back into the room.

Tips for Capping the Open End on Crown Molding

* Use a sharp miter saw blade to ensure a clean cut.

* Apply the adhesive evenly so that the molding will adhere properly.

* Press the molding firmly into place to ensure a secure hold.

* Fill the nail holes with wood filler to create a smooth finish.

* Sand the wood filler smooth using fine-grit sandpaper.

* Paint the crown molding if desired to match the color of the wall or ceiling.