How to Get Rid of Tree Roots Under an Above-Ground Swimming Pool

The first step is to drain the pool so that you can access the tree roots. To do this, simply connect a garden hose to the drain valve on the side of the pool and open the valve. Let the water drain until the pool is completely empty.

Step 2: Locate the tree roots.

Once the pool is empty, you can start looking for the tree roots. They will likely be located near the base of the pool, but they could also be further out. Use a shovel to dig around the base of the pool until you find the roots.

Step 3: Cut the tree roots.

Once you have found the tree roots, you will need to cut them. To do this, you can use a sharp knife or a pruning saw. Be careful not to cut the pool liner when you are cutting the roots.

Step 4: Remove the roots.

Once you have cut the tree roots, you can remove them from the pool area. Use a shovel or a rake to pull the roots out of the ground.

Step 5: Fill the pool.

Once you have removed the tree roots, you can fill the pool back up with water. Be sure to add a chemical treatment to the water to keep it clean.

Tips:

* If the tree roots are too large to cut with a knife or a pruning saw, you may need to use a chainsaw.

* Be careful not to damage the pool liner when you are cutting the roots.

* If the tree roots are located under a concrete slab, you may need to hire a professional to remove them.