How to Parallel a Fence with a DW744

The DeWalt Model DW744 table saw has a telescoping fence or ripping rail that enables you to safely rip boards up to 24 1/2 inches long. The fence is designed with a rack and pin mechanism so you can adjust it quickly, accurately and smoothly.

Hex head ratchet

Instructions

- 1
  Pull the lock lever up to unlock the rip rail or fence. The lock lever is on the side of the saw below the end of the fence.
- 2
  Loosen the two hex bolts beside the pinion bearing. The pinion bearing has spokes but no rim.
- 3
  Change the angle of the fence using the fine adjustment knob in the same location. Make fence parallel to the blade.
- 4
  Push the lock lever down to lock the fence. Check the fence to ensure that it is parallel to the blade.
- 5
  Tighten the hex bolts.

Homemade Arbor Press

How to Cut Wood Siding With a Palm Router

Woodworking