Drill a 4¼-inch-diameter hole through the vinyl where you want to install the vent, using a bi-metal hole saw.
Screw a vinyl surface mounting block to the exterior of your vinyl. Vent caps work best when there is a strong seal between the cap and the exterior wall, but that's difficult when you have an exterior wall with texture, such as vinyl. A vinyl surface mounting block design helps create the seal you need so your dryer vent works its best.
Slide the vent cap through the hole. Screw it in place, and then seal the edges with caulk.
Run ducts from the back of your dryer to the vent location. Galvanized steel ducts work best because they are smooth, meaning lint won't become caught in the grooves on its way to the vent. Push a lower elbow on your dryer and an upper elbow on the inside of your vent cap. Slide the crimped end of galvanized steel ducts into the fitted end, and run as many pieces as necessary to connect your dryer with the vent cap. Tape the seams together, using metal foil tape to create a good seal. Use galvanized steel elbows to make turns when necessary, and cut galvanized steel ducts to size, using tin snips.