How to Replace a Grohe Ladylux Hose

* Locate the water supply shutoff valves for the faucet.

* Turn the valves clockwise until they are completely closed.

Step 2: Disconnect the old hose.

* Use a wrench to loosen the nuts that connect the old hose to the faucet and sprayer.

* Pull the old hose out of the way.

Step 3: Install the new hose.

* Insert the new hose into the faucet and sprayer.

* Tighten the nuts until they are snug.

Step 4: Turn on the water supply.

* Open the water supply shut off valves counterclockwise until they are fully open.

* Check for leaks. If any are present, tighten the connections that are leaking until the leak stops.

Step 5: Test the faucet.

* Turn on the faucet and check for leaks.

* If there are no leaks, your new hose is installed and ready to use.