How to Add a Touch Control Lamp Switch on to a Lamp

A touch-control lamp is very convenient. It enables you to turn the lamp on or off and control the brightness of the bulb by simply touching any metal part of the lamp. If you desire the functionality of touch-control but do not want to purchase a new lamp, you can convert your existing lamp into a touch-control lamp. Touch-control switches are available where lamps are sold or in the lighting department of your local home center.

Screw-in touch control switch

Instructions

- 1
  Remove the finial -- the piece that secures the shade to the lamp -- from the top of the lamp shade by screwing it off in a counterclockwise direction.
- 2
  Lift the lamp shade straight up and place it aside.
- 3
  Unscrew the light bulb from the socket and place it aside.
- 4
  Thread the touch-control switch into the light bulb socket on the lamp.
- 5
  Tighten the thumb screw on side of the touch-control switch to secure the switch into the socket. Skip this step if the touch-control you are using does not have a thumb screw.
- 6
  Screw the light bulb into the socket at the top of the touch control switch.
- 7
  Replace the lampshade and the finial.
- 8
  Operate the lamp by touching a metal part of the lamp to turn it on. Touch the lamp again to brighten the bulb. Touch the lamp again to turn it off.

Refurbishing an Old Brass Chandelier

How to Make a Lamp Shade for a Ceiling Fixture

Lighting