How to Trim a Kerosene Lamp Wick

* A kerosene lamp

* A pair of scissors

* A piece of cloth

Step 2: Prepare the lamp.

* Make sure the lamp is turned off.

* Remove the chimney and the burner.

* Place the cloth under the burner to catch any spills.

Step 3: Trim the wick.

* Use the scissors to cut the wick to the desired length. The wick should be about 1/4 inch long.

* Be careful not to cut the wick too short, or it will not be able to draw up the kerosene.

Step 4: Replace the burner and the chimney.

* Replace the burner on the lamp and screw it into place.

* Replace the chimney.

Step 5: Light the lamp.

* Turn the lamp on and light the wick.

* Adjust the flame to the desired size.

Tips:

* Trim the wick regularly to keep the lamp burning properly.

* If the wick is too long, it will smoke and produce a bad smell.

* If the wick is too short, it will not be able to draw up the kerosene and the lamp will not light.

* Be careful not to spill any kerosene when trimming the wick.