How to Hang a Roman Style Shade on Spring Tension Rod

Tools and Materials:

* Roman Style Shade

* Curtain Clip Rings (plastic or metal)

* Measuring Tape

* Pencil

* Scissors

* Spring Tension Rod

Instructions:

1. Measure the width of your window including the trim.

2. Cut your spring tension rod to about 1-2 inches less than the measured width of your window.

3. Insert the spring tension rod to your window and adjust it so that it stands firm and straight.

4. Determine the approximate location of the hooks on your window frame where the rings and shade will attach.

5. Mark these locations with a pencil to easily install the hooks.

6. Install curtain hooks to your window frame at the marked locations using the provided hardware or nails (if necessary).

7. Slide your curtain clip rings through the grommets on the back of the shade. Ensure the shade faces toward the window and the clip rings are properly secured in place.

8. Hook the curtain clip rings onto the curtain hooks you previously installed on the window frame.

9. Adjust the shade to ensure uniform coverage and fullness.

Additional Tips:

* If your roman shade has multiple curtain hooks on each side, distribute the clip rings evenly across these hooks to ensure uniform lifting and folding of the shade.

* Check that the shade is at the desired height and can cover the window fully when lowered.

* To ensure the shade stays in place, verify the clip rings are securely fastened to the curtain hooks.

* If you have multiple shades, make sure they are hung at the same level for a consistent appearance.