How to Tape Decorations on Walls Without Damage

1. Clean and dry your walls. Make sure the surface is free of dust, dirt, and moisture.

2. Apply painter’s tape to the edges of your decoration. Press the tape firmly in place, making sure that it is completely adhered to the wall.

3. Hang your decoration. Carefully hang your decoration on the wall, using the painter’s tape to secure it in place.

4. Remove the painter’s tape slowly and carefully. Once you are finished with your decoration, slowly peel the painter’s tape off of the wall. Be careful not to pull too hard, as this could damage the paint.

Using Removable Adhesive Dots

1. Clean and dry your walls. Make sure the surface is free of dust, dirt, and moisture.

2. Apply removable adhesive dots to the back of your decoration. Press the dots firmly in place, making sure that they are evenly distributed.

3. Hang your decoration. Carefully hang your decoration on the wall, using the adhesive dots to secure it in place.

4. Remove the adhesive dots slowly and carefully. Once you are finished with your decoration, slowly peel the adhesive dots off of the wall. Be careful not to pull too hard, as this could damage the paint.

Using Command Strips

1. Clean and dry your walls. Make sure the surface is free of dust, dirt, and moisture.

2. Measure and cut your Command Strips to size. Cut the strips to the desired length, making sure that they are long enough to secure your decoration.

3. Peel off the backing of the Command Strips. Be careful not to touch the adhesive side of the strips.

4. Press the Command Strips onto the wall. Press the strips firmly in place, making sure that they are evenly distributed.

5. Hang your decoration. Carefully hang your decoration on the wall, using the Command Strips to secure it in place.

6. Remove the Command Strips slowly and carefully. Once you are finished with your decoration, slowly peel the Command Strips off of the wall. Be careful not to pull too hard, as this could damage the paint.