# How to Remove the Connection Pipe on a Kenmore Hose
Kenmore washing machines and dishwashers use flexible rubber hoses to receive and pump out water as part of the normal operation of the appliance. The hot water hose for a Kenmore dishwasher is smaller in diameter than the hoses used to hook up a Kenmore washing machine, but the removal procedure is the same for both types of appliances. Follow the procedure precsisely to avoid flooding your laundry room or kitchen.
Things You'll Need
- Adjustable wrench
- Bucket
Instructions
-
-
1
Close the water valve or valves, depending on the type of Kenmore appliance. For a washing machine, twist the two knobs on the wall behind the appliance clockwise until tight where the hoses connect to the faucets. Shut off water to a Kenmore dishwasher by twisting the knob where the hose connects to the plumbing under the sink next to the dishwasher.
-
2
Grip the metal coupler on the end of the hose where it connects to the pipe, using the adjustable wrench. Twist the coupler counterclockwise to loosen and remove it from the pipe.
-
3
Lower the hose into the bucket to drain the water inside.
-
1
Washer & Dryers
- How to Remove the Line or Hose From a Whirlpool Dual Water Valve
- How to Replace the Water Line in the Door of a Kenmore
- How to Remove the Water Dispenser on Amana Refrigerators
- How to Remove Water From the Cellar Floor
- How to Install a Hose to a Pipe Water Hose
- How to Remove the Element in a Kenmore Dishwasher
- How to Replace a Hose on a Frigidaire or Kenmore Washer
- How to Remove the Pulley on a Kenmore Front-Load Washer
- How to Remove the Tub on a Kenmore Elite HE3
- How to Remove the Pump on a Kenmore Elite Dishwasher
- How to Fix a Kenmore Washer 90 Series That Does Not Remove Water
- How to Remove the Front of a Kenmore Combo
