How to Clean LG Front Load Washers

Cleaning your LG front-load washer regularly helps to keep it in good condition and prevents build-up of dirt, detergent, and other debris that can cause stains, odors, and even malfunctions. Here's a step-by-step guide on how to clean your LG front-load washer:

Clean the door gasket:

1. Open the washer's door and thoroughly clean the door gasket with a damp cloth.

2. Remove any visible dirt or debris, paying close attention to any folds or creases where dirt may accumulate.

3. Wipe the gasket dry with a clean cloth.

Clean the detergent drawer:

1. Pull out the detergent drawer.

2. Disassemble the drawer by pressing the release button and lifting the drawer up and out.

3. Rinse all parts of the detergent drawer under warm running water.

4. Use a soft brush to remove any stubborn detergent residue or build-up.

5. Let the drawer parts air dry completely before reassembling the drawer and placing it back in the washer.

Clean the lint filter:

1. Locate the lint filter inside the washer's door. It is usually a small mesh filter.

2. Pull out the lint filter.

3. Rinse it under warm water.

4. Use a soft brush to remove any lint or debris.

5. Let the lint filter air dry completely before placing it back in the washer.

Run the washer's self-cleaning cycle:

1. Most LG front-load washers have a self-cleaning cycle, often called the "Tub Clean" or "Clean Washer" cycle.

2. Refer to your washer's user manual for instructions on how to run the self-cleaning cycle.

3. Add the recommended amount of cleaning solution to the detergent dispenser. You can use a commercial washing machine cleaner or a mixture of baking soda and white vinegar.

4. Run the self-cleaning cycle. This will help sanitize the washer's drum and remove dirt and build-up from internal parts.

Clean the washer exterior:

1. Use a damp cloth to wipe the outside of the washer.

2. Pay special attention to the control panel and any areas with buttons or knobs.

3. Use a soft brush to remove any dirt or debris from the vents or gaps around the washer's door.

4. If the surface is heavily soiled or stained, you can use a mild detergent mixed with warm water to clean it.

Tips:

a. Run a hot water cycle with a cup of white vinegar every few months to help prevent build-up and keep the washer fresh and clean.

b. Avoid overloading the washer as it can put strain on the machine and contribute to wear and tear.

c. Leave the washer door open after each use to allow it to air dry and prevent mold or mildew growth.

d. If you live in an area with hard water, you may need to use a water softener to prevent mineral build-up in the washer.

By following these cleaning instructions, you can keep your LG front-load washer in pristine condition and ensure optimal performance.