How to Replace Kenmore Glass Top Stoves

The glass panel on your Kenmore stove is sturdy enough to withstand the weight of several large objects placed on top of it. However, it will break if mistreated. When the glass breaks, you must immediately turn off the burners. Only resume use of the range after a new glass panel is installed. Rather than hiring a service technician to replace the panel, make the repair yourself to save time and money.

Phillips screwdriver
Sturdy object

Instructions

- 1
  Disconnect the range's power source prior to beginning the repair.
- 2
  Open the oven door, and then remove the two to four screws under the front portion of the underside of the glass panel.
- 3
  Lift the panel up to expose the burners attached to the underside of it. Support the panel in an elevated position by using a sturdy object, or instruct a partner to hold the panel.
- 4
  Remove the hex-style screws that secure the burner brackets. These screws secure the burners to the underside of the glass.
- 5
  Lift the panel up and off of the range.
- 6
  Transfer any brackets installed on the old panel to the new panel. The brackets are secured with screws.
- 7
  Align the new panel with the range, and elevate it by employing the same method used to elevate the old panel.
- 8
  Secure the cross braces and burners to the underside of the panel by using the screws that were removed.
- 9
  Lower the glass panel onto the range, and then secure it by using the screws that were removed.
- 10
  Restore the range's power source.

Garage Propane Heater Vent Types

How to Change an Ignitor Switch on a Furnace

Other Home Appliances