How to Adjust Pool Jets for Skimmers

The pool jets are usually located on the sides of the pool, just below the waterline.

Step 2: Remove the jet covers.

The jet covers are usually held in place by a screw or a snap-on mechanism. Remove the jet covers to expose the jets.

Step 3: Adjust the jet direction.

The jets can be adjusted to point in different directions. To adjust the jet direction, simply turn the jet nozzle.

Step 4: Adjust the jet water pressure.

The jet water pressure can be adjusted by turning the valve on the jet. To increase the water pressure, turn the valve clockwise. To decrease the water pressure, turn the valve counterclockwise.

Step 5: Replace the jet covers.

Replace the jet covers to hold them in place.

Tips:

* When adjusting the pool jets, be sure to keep the water level in the pool above the jets. If the water level is too low, the jets will not be able to function properly.

* If you are unable to adjust the pool jets yourself, you can contact a pool service company to help you.

By following these steps, you can easily adjust your pool jets for skimmers.