How to Load Nails in a Nail Gun

Step 1: Gather your materials.

You will need:

- A nail gun

- Nails

- Safety glasses

Step 2: Prepare the nail gun.

- Make sure the nail gun is unplugged and turned off.

- Open the nail gun's magazine. This is usually done by pressing a button or lever.

- Insert the nails into the magazine. Make sure the nails are pointing in the correct direction.

- Close the magazine.

Step 3: Put on your safety glasses.

This will protect your eyes from any flying debris.

Step 4: Turn on the nail gun.

- Plug in the nail gun and turn it on.

- Hold the nail gun firmly against the surface you want to nail.

- Pull the trigger to fire the nail.

Step 5: Repeat steps 4 and 5 until all of the nails are driven.

- Be sure to keep your fingers away from the trigger when you are not using the nail gun.

- When you are finished, turn off the nail gun and unplug it.

Tips:

- To avoid jams, make sure the nails are properly inserted into the magazine and that the magazine is closed properly.

- If a nail does jam, turn off the nail gun and unplug it. Then, use a screwdriver or other tool to remove the jammed nail.

- Be careful not to over-drive the nails. This can damage the surface you are nailing.

- Always wear safety glasses when using a nail gun.