How to Install a Sunroof in Mini Cooper

1. New sunroof assembly (including glass, frame, and hardware)

2. Sealant

3. Tape measure

4. Level

5. Drill

6. Jigsaw or utility knife

7. Screwdriver

8. Wrench

9. Safety goggles

10. Gloves

Instructions:

1. Remove the headliner.

- Pry up the sun visors and remove them.

- Remove the A-pillar trim panels by pulling them straight out.

- Remove the B-pillar trim panels by removing the screws at the top and bottom.

- Unclip the headliner from the windshield and rear window.

- Carefully lower the headliner and set it aside.

2. Prepare the roof.

- Clean the area where the sunroof will be installed.

- Mark the location of the sunroof opening using the template provided with the sunroof.

3. Cut the hole for the sunroof.

- Use a jigsaw or utility knife to cut out the hole.

- Make sure the cuts are clean and smooth.

4. Install the sunroof.

- Position the sunroof in the hole and make sure it is level.

- Apply a bead of sealant to the underside of the frame and then set it into place.

- Secure the frame with the provided hardware.

- Replace the headliner.

- Reinstall the A-pillar and B-pillar trim panels.

- Reinstall the sun visors.

- Test the sunroof to make sure it operates correctly.

Additional tips:

1. Make sure the sunroof opening is large enough to accommodate the sunroof frame and glass.

2. Use a level to make sure the sunroof is installed straight.

3. Apply sealant to prevent leaks.

4. Test the sunroof before re-installing the headliner to ensure proper function.