How to Hang a Chandelier From Concrete Ceiling

* Chandelier

* Measuring tape

* Pencil

* Drill

* 3/8-inch masonry bit

* Hammer

* 2-inch concrete screws

* Wire cutters

* Electrical tape

Instructions

1. Turn off the power to the ceiling light fixture. This is important to do to avoid getting shocked.

2. Remove the old light fixture. If there is an old light fixture in place, you will need to remove it before you can install the new chandelier.

3. Measure the distance from the ceiling to where you want to hang the chandelier. This measurement will help you determine how long the chandelier chain should be.

4. Cut the chandelier chain to the desired length. Use a wire cutter to cut the chain to the desired length.

5. Attach the chandelier chain to the chandelier. There should be a hook or loop on the chandelier that the chain can attach to.

6. Drill holes in the ceiling. Use a 3/8-inch masonry bit to drill holes in the ceiling where you will be mounting the chandelier. The holes should be about 2 inches deep.

7. Insert the concrete screws into the holes. Hammer the concrete screws into the holes until they are flush with the surface of the ceiling.

8. Attach the chandelier to the ceiling. Loop the chandelier chain over the concrete screws and then tighten the nuts on the screws.

9. Connect the electrical wires. Connect the black wire from the chandelier to the black wire from the ceiling, the white wire from the chandelier to the white wire from the ceiling, and the ground wire from the chandelier to the ground wire from the ceiling.

10. Turn on the power to the ceiling light fixture. Once you have connected the electrical wires, you can turn on the power to the ceiling light fixture and enjoy your new chandelier.

Tips

* If you are not comfortable drilling holes in concrete, you can hire a professional to do it for you.

* Be sure to use the correct size concrete screws for your chandelier. If the screws are too small, they will not hold the chandelier securely in place.

* If you are hanging a heavy chandelier, you may need to use a support beam to help support the weight.