How to Install an Above Ground Pool Inground

Step 1: Site Selection and Preparation

- Choose a Suitable Location: Select a level area with good drainage, away from trees and other potential hazards.

- Mark the Pool Area: Outline the pool's desired location using stakes or spray paint.

Step 2: Excavation

- Dig the Pool Pit: Excavate the area within the marked outline to a depth that matches the pool's sidewall height. Ensure the sides are straight and vertical.

- Compact the Soil: Tamp down the soil at the bottom of the pit to create a firm, level base.

Step 3: Base Preparation

- Install a Gravel or Sand Base: Depending on your soil type and local conditions, you may need to add a layer of compacted gravel or sand at the bottom of the pit.

- Level the Base: Ensure the base is perfectly level using a leveling tool.

Step 4: Pool Assembly

- Install Bottom Rails: Assemble the bottom rails of the pool according to the manufacturer's instructions.

- Attach Pool Walls: Attach the pool walls to the bottom rails and support them with temporary braces.

- Install Top Rails: Continue assembling the pool walls and attach the top rails.

- Connect Plumbing: Connect the pool's plumbing system according to the manufacturer's guidelines.

Step 5: Backfilling

- Backfill the Pool Sides: Gradually backfill the space around the pool with soil, ensuring it is well compacted to provide support.

- Continue Filling the Pool: Fill the remaining sides of the pool with soil until it reaches the top of the pool walls.

Step 6: Finishing Touches

- Add Coping Stones: Install coping stones around the pool's edge to create a finished look and provide a safe seating area.

- Install Decking (Optional): You may choose to install a deck around the pool for added convenience and aesthetics.

Step 7: Leveling the Pool

- Check Pool Level: Use a spirit level to ensure that the pool is perfectly level. Adjust as necessary.

Step 8: Adding Water

- Fill the Pool: Gradually fill the pool with water, using a hose or a submersible pump. Control the water flow to prevent damage to the pool.

Step 9: Final Checks and Maintenance

- Test Plumbing: Turn on the pool's pump and filtration system to ensure proper operation.

- Add Chemicals: Treat the pool water with the appropriate chemicals to maintain cleanliness and prevent algae growth.

- Continue Backfilling: Continue backfilling around the outside of the pool to stabilize it.

Remember that installing an above-ground pool inground can be a complex and challenging process, so it's essential to follow the manufacturer's guidelines carefully. If you have doubts or concerns, consider hiring professionals to assist you.