How to Adjust Swimming Pool Water Levels

Checking the Water Level:

1. Skimmer Level: The water level should be about halfway up the skimmer opening, allowing the skimmer to efficiently collect debris and prevent overflowing.

2. Return Jets: The water level should be high enough to cover the return jets to ensure proper water circulation.

Adjusting the Water Level:

1. Locate the Fill Spout: Identify the fill spout or hose connection, usually located on the pool's side or deck.

2. Attach a Garden Hose: Connect a garden hose to the fill spout.

3. Turn On the Water: Open the water valve and allow water to flow into the pool.

4. Monitor the Water Level: Keep an eye on the water level as it rises. Stop filling when it reaches the desired level.

5. Disconnect the Hose: Once the water level is correct, disconnect the garden hose from the fill spout.

Draining Excess Water:

1. Locate the Drain: Find the pool's main drain, which is usually at the deepest point of the pool.

2. Attach a Submersible Pump: Connect a submersible pump to the drain.

3. Connect a Hose: Attach a hose to the pump's discharge port and direct it to a suitable drainage area, such as a storm drain or lower ground.

4. Turn On the Pump: Switch on the pump to begin draining the excess water.

5. Monitor the Water Level: Keep monitoring the water level until it reaches the desired level.

6. Turn Off the Pump: Once the water level is correct, turn off the submersible pump and disconnect it from the drain.

Tips and Cautions:

1. Gradual Adjustments: Make gradual adjustments to the water level rather than filling or draining the pool too quickly, as this can strain the pool's structure and equipment.

2. Overflow Prevention: Ensure that the water level doesn't exceed the recommended level to prevent overflowing, especially during heavy rains.

3. Safety Precautions: When using a submersible pump, ensure that it is appropriately grounded to prevent electrical hazards.

4. Regular Maintenance: Regularly check and adjust the water level to ensure it stays within the recommended range.

By following these steps and tips, you can effectively adjust the swimming pool water levels and maintain a safe and enjoyable swimming environment.