How to Hook Up an AquaBug Pool Cleaner

The AquaBug pool cleaner is a great way to keep your pool clean and free of debris. It’s easy to install and use, and it can save you a lot of time and effort.

Here are the steps on how to hook up an AquaBug pool cleaner:

1. Gather your materials.

You will need the following materials:

- AquaBug pool cleaner

- Pool hose

- Hose clamp

- Screwdriver

2. Remove the hose from the suction port.

Using a screwdriver, loosen the hose clamp that connects the hose to the suction port on the side of your pool. Remove the hose from the port.

3. Connect the AquaBug to the hose.

Insert the AquaBug into the end of the hose. There is a small clip that you need to line up. Press it into the opening until you hear a click and it is secure. Use a hose clamp to tighten the connection between the AquaBug and the hose.

4. Replace the hose on the suction port.

Reinsert the hose into the suction port on the side of your pool. Tighten the hose clamp to secure the connection.

5. Turn on the AquaBug.

Plug in the AquaBug to an electrical outlet. The AquaBug will start cleaning your pool automatically.

6. Clean the AquaBug as needed.

To keep the AquaBug working properly, you will need to clean it periodically. To do this, simply remove the AquaBug from the pool, rinse it off with a hose, and let it air dry.

By following these steps, you can easily hook up an AquaBug pool cleaner and keep your pool clean and free of debris.