How to Repoint a Patio

Repointing is the process of replacing the mortar between the joints of patio stones. Over time, mortar can become damaged by weather and wear, causing the patio to become unstable and uneven. Repointing is a relatively simple and inexpensive way to repair a patio and can be done by do-it-yourselfers with basic skills and tools.

To repoint a patio, you will need the following materials:

* New mortar mix (available at home improvement stores)

* A pointing trowel

* A grout float

* A bucket

* Water

* A sponge

Instructions:

1. Clean the patio. Sweep away any dirt or debris from the patio. You may also want to power wash the patio to remove any stubborn dirt or grime.

2. Remove the old mortar. Use the pointing trowel to chip away the old mortar from between the joints of the patio stones. Be careful not to damage the stones themselves.

3. Prepare the mortar mix. Follow the instructions on the package to mix the mortar mix. The consistency of the mortar should be similar to peanut butter.

4. Apply the mortar mix. Use the pointing trowel to apply the mortar mix to the joints between the patio stones. Press the mortar firmly into the joints, making sure to fill them completely.

5. Smooth the mortar. Use the grout float to smooth out the mortar and remove any excess.

6. Clean the patio. Use the sponge to clean the patio and remove any dirt or debris.

7. Allow the mortar to cure. Allow the mortar to cure for at least 24 hours before walking on the patio.

Repointing a patio is a relatively simple and inexpensive way to repair a damaged patio. By following these instructions, you can easily restore the beauty and functionality of your patio.