How to Make a Grave Fence

Making a grave fence adds a personal touch to a loved one's resting place. While purchasing one from a store is always an option, the following steps guide you on how to create your own.

1. Gather Materials:

- Untreated wood (such as cedar, redwood, or any rot-resistant wood)

- Wood screws or nails

- Measuring tape

- Level

- Saw

- Drill

- Sandpaper

- Stain or paint (optional)

2. Measure and Cut the Wood:

- Determine the desired height and width of your grave fence.

- Cut the wood into the following pieces:

- 4 posts (for the corners of the fence)

- 4 horizontal rails (to connect the posts)

- Picket slats (vertical pieces that make up the fence)

3. Assemble the Posts:

- Place the posts upright on a flat surface.

- Attach the horizontal rails to the posts using screws or nails, ensuring they are level.

4. Add Picket Slats:

- Space the pickets evenly and attach them to the horizontal rails with screws or nails.

5. Sand the Fence:

- Smooth out any rough edges using sandpaper.

6. (Optional) Stain or Paint:

- Apply a coat of stain or paint for added protection and aesthetics.

7. Install the Fence:

- Dig four holes at the corners, making sure they are deep enough to accommodate the length of the posts.

- Place the fence into the holes and fill with soil, firmly packing it around the posts to secure the fence.

8. Maintenance and Care:

- Periodically check for any loose screws or nails and tighten them if necessary.

- Reapply stain or paint when needed to maintain the fence's appearance and protect the wood.