How to Install Vinyl Siding on Eaves & Overhangs

1. Remove any existing siding, trim, or nails from the eaves.

2. Caulk the seams between the eaves and the roof to prevent water damage.

3. Make sure the eaves are clean, dry, and free of any debris.

Step 2: Install Starter Strip.

1. Cut the starter strip to size so it fits snugly between the roofline and the eaves.

2. Nail or screw the starter strip into place.

Step 3: Install J Channel.

1. Cut the J channel to size and then attach it to the eaves by nailing or screwing it in place.

Step 4: Install Soffits

1. Cut soffits to size and attach them to the rafters using nails or screws. Ensure they fit tightly to prevent gaps or air leaks.

Step 5: Install the Vinyl Siding.

1. Cut the vinyl siding to size so it fits between the starter strip and the J channel.

2. Insert the vinyl siding into the starter strip and push it upwards until it locks into place.

3. Overlap the edges of each piece of siding and secure it with nails or screws.

Step 6: Finish the Installation

1. Caulk the seams between the vinyl siding and the eaves.

2. Replace the trim around the eaves.

3. Inspect the installation to make sure it is secure and weathertight.