How to Remove Wax From Tile

Removing wax from tile surfaces can be a tricky task, especially if the wax has been there for a while. Here's a step-by-step guide to help you safely and effectively remove wax from tile:

1. Gather the necessary supplies:

- Wax removal product: There are various commercial wax removal products available. Ensure you select one that's suitable for your type of tiles.

- Microfiber cloths

- Scrubbing pad or nylon scouring sponge (for stubborn wax)

- A putty knife or scraper (for stubborn wax)

- Vacuum cleaner

- Gloves

2. Prepare the tile surface:

- Sweep or vacuum the tile to remove any loose dirt, dust, or debris. This will help prevent scratches during cleaning.

3. Apply the wax removal product:

- Follow the instructions on your chosen product for proper usage and dilution (if required).

- Apply the product directly onto the tiles or onto your microfiber cloth and then spread it evenly over the surface.

- Let it sit for the recommended amount of time (as per the product's instructions) to break down the wax.

4. Scrub the tiles:

- Use a microfiber cloth to scrub the tiles gently. Work in small sections to ensure thorough cleaning.

- If the wax is stubborn, switch to a scrubbing pad or nylon scouring sponge. However, be careful not to apply excessive pressure, as it can damage the tile surface.

5. Scrape off any stubborn wax:

- For thick or stubborn wax buildup, you may need to use a putty knife or scraper. Gently scrape off the excess wax, taking care not to scratch the tiles.

6. Rinse the tiles:

- Rinse the tiles thoroughly with clean water to remove any remaining wax residue and cleaning product.

- Dry the tiles immediately with a clean, dry microfiber cloth. Leaving them wet can cause water spots on the tiles.

7. Repeat the process:

- If there is still some wax residue, you may need to repeat the process until all the wax has been removed.

8. Buff the tiles:

- Once all the wax has been removed, buff the tiles with a dry microfiber cloth to restore their shine.

Remember to test a small inconspicuous area before cleaning the entire surface, especially if you're unsure about the suitability of the product for your tile type. If the tiles are delicate or have any special finishes, it's best to seek advice from a professional cleaning service.