How to Open a Honeywell Safe

Using the Pass Code

• 1

  Enter your pass code and press the "#" key. If this is the first time you are opening the safe, use the factory set pass code "159#." The indicator light on the safe will turn green when the pass code is entered correctly.

• 2

  Turn the handle to the right and pull on the door to open the safe.

• 3

  Close the door of the safe and turn the handle to the lift to lock the safe.

Using the Emergency Key

• 4

  Push down on the battery cover that is located under the safe handle.

• 5

  Remove the batteries from the safe to expose the emergency override keyhole.

• 6

  Insert the emergency override key in the keyhole, turn it to the right and turn the handle to the right to open the door.

• 7

  Turn the emergency override key back to the left and remove it from the keyhole.

• 8

  Lock the safe by closing the door and turning the handle to the left.