How to Program a PT Cruiser Keyless Remote

Programming a PT Cruiser keyless remote involves specific steps and may vary slightly depending on the year of your vehicle. Here's a general guide on how to program your PT Cruiser remote:

Step 1: Gather Necessary Items:

- Your PT Cruiser keyless remote (a working master remote is usually required).

- A spare key for your PT Cruiser.

- A pen or pencil and a small piece of paper.

Step 2: Prepare Your Keyless Remote:

- Make sure your keyless remote has a fresh battery.

- Remove any key rings or attachments that might interfere with the programming process.

Step 3: Enter Programming Mode:

- Insert your spare key into the ignition and turn it to the "ON" position without starting the vehicle.

- Leave it in the "ON" position for about 10 seconds.

- Turn the ignition off and remove the key.

Step 4: Open and Close the Driver's Door:

- Open the driver's door.

- Close the driver's door.

Step 5: Repeat Step 3 and 4:

- Repeat step 3 and 4 three times.

- Each time, insert the spare key, turn it to the "ON" position for about 10 seconds, turn it off, and remove it.

Step 6: Press and Hold the Unlock Button:

- After the third repetition, keep the driver's door closed.

- Press and hold the "Unlock" button on the keyless remote until the interior lights flash or chirp.

Step 7: Press the Lock Button:

- Within 5 seconds of the lights flashing, press the "Lock" button on the keyless remote.

Step 8: Verify Programming:

- Observe the interior lights or listen for a confirmation chirp again. This confirms that the remote is programmed.

Step 9: Repeat for Additional Keyless Remotes:

- If you have additional keyless remotes, you can repeat the programming process for each remote.

Step 10: Test the Keyless Remote:

- Try locking and unlocking your PT Cruiser using the newly programmed keyless remote.

Remember that programming steps might differ slightly depending on the year and model of your PT Cruiser, so it's recommended to refer to your vehicle's owner's manual for more specific instructions. If you encounter any difficulties or the instructions don't work, it's advisable to consult a professional locksmith or your dealership for assistance.