How to Fix a Bent Andersen Storm Door

2. Gather Tools and Materials. To fix a bent Andersen storm door, you'll need the following tools and materials:

* Screwdriver

* Drill

* Utility knife

* Measuring tape

* Sandpaper

* Wood glue

* Clamps

* Replacement screws (if needed)

3.Remove the Storm Door. To begin the repair, you'll need to remove the storm door from its frame. To do this, use a screwdriver to remove the screws that secure the door to the frame. Be careful not to damage the frame as you remove the screws.

4. Remove the Glass. Once the door is removed, you'll need to remove the glass. To do this, use a utility knife to cut through the caulk that seals the glass in place. Be careful not to damage the glass as you cut through the caulk.

5. Straighten the Door. Once the glass is removed, you can begin straightening the bent door. To do this, place the door on a flat surface and use a hammer to gently tap the door back into place. Be careful not to use too much force, as this could damage the door.

6. Reattach the Glass. Once the door is straight, you can reattach the glass. To do this, apply a bead of wood glue around the edges of the glass and then press the glass into place. Secure the glass in place with clamps and allow the glue to dry according to the manufacturer's instructions.

7. Reinstall the Storm Door. Once the glue is dry, you can reinstall the storm door. To do this, simply reverse the steps you took to remove the door. Be sure to secure the door with the replacement screws, if necessary.

By following these steps, you can fix a bent Andersen storm door and restore it to its original condition.