How to Replace Jalousies With Vinyl Sliding Windows

* Hammer

* Pry bar

* Saw

* Drill

* Level

* Measuring tape

* Caulk gun

* Screwdriver

* Vinyl sliding windows

* 2x4 lumber

Materials:

* Vinyl sliding windows

* 2x4 lumber

Instructions:

1. Remove the jalousies. Use a hammer and pry bar to remove the jalousies from the window frame. Be careful not to damage the window frame.

2. Cut the 2x4 lumber. Cut the 2x4 lumber to the same size as the window frame.

3. Install the 2x4 lumber. Install the 2x4 lumber around the window frame. Use screws to secure the 2x4 lumber in place.

4. Install the vinyl sliding windows. Place the vinyl sliding windows in the window frame. Use a level to make sure the windows are installed level. Secure the windows in place with screws.

5. Caulk around the windows. Use a caulk gun to caulk around the windows. This will help to seal the windows and prevent water from leaking into the house.

Tips:

* Be careful not to damage the window frame when removing the jalousies.

* Make sure to measure the window frame carefully before cutting the 2x4 lumber.

* Use a level to make sure the windows are installed level.

* Caulk around the windows to help seal the windows and prevent water from leaking into the house.