How to Install a Window in Corrugated Siding

* Corrugated siding

* Window

* Measuring tape

* Level

* Drill

* Jigsaw

* Caulk

* Screws

Instructions

1. Measure the opening for the window. Cut the corrugated siding to size using a jigsaw.

2. Level the window in the opening. Shim the window as needed to make sure it is level.

3. Drill holes for the screws. Use a drill bit that is slightly smaller than the screws.

4. Insert the screws into the holes and tighten them until the window is secure.

5. Caulk around the window to seal it from the weather.

Tips

* If you are installing the window in a new wall, you will need to frame the opening before you can install the window.

* Make sure the window is level before you screw it in place.

* Caulk around the window to seal it from the weather.