How to Shorten Wooden Blinds That Have a Pulley

Tools and Materials

* Measuring tape

* Pencil

* Safety glasses

* Utility knife

* Screwdriver

* Hammer

* Nails

* Wood glue

Instructions

1. Measure the blinds. Measure the length of the blinds from the top to the bottom. Record this measurement.

2. Mark the blinds. Use a pencil to mark the blinds where you want to cut them. Make sure the marks are even on both sides of the blinds.

3. Cut the blinds. Use a utility knife to cut the blinds along the marks you made. Be careful not to cut yourself.

4. Remove the pulley. Use a screwdriver to remove the screws that hold the pulley in place. Be careful not to lose the screws.

5. Sand the edges. Use sandpaper to smooth the edges of the blinds.

6. Reattach the pulley. Place the pulley back in place and insert the screws. Tighten the screws until they are snug.

Shorten the Strings

7. Measure the strings. Measure the length of the strings from the top to the bottom. Record this measurement.

8. Mark the strings. Use a pencil to mark the strings where you want to cut them. Make sure the marks are even on both sides of the blinds.

9. Cut the strings. Use a utility knife to cut the strings along the marks you made. Be careful not to cut yourself.

Rehang the blinds. Rehang the blinds in the window and adjust the tension of the strings until the blinds are at the desired height.

Tips

* If you are unsure of how to shorten your wooden blinds, consult a professional.

* Be careful when working with sharp objects.

* Make sure the blinds are level before hanging them.