Can Wall Bulges on Fiberglass Pools Be Fixed?

* Improper installation

* Poor water chemistry

* Structural damage

Improper installation: If the pool was not installed properly, the walls may not be properly supported and can start to bulge over time.

Poor water chemistry: High levels of chlorine or bromine can cause the fiberglass to deteriorate and weaken, making it more susceptible to bulging.

Structural damage: Damage to the pool walls, such as cracks or holes, can also cause them to bulge.

Can wall bulges on fiberglass pools be fixed?

The answer is yes, wall bulges on fiberglass pools can be fixed. However, the best course of action will depend on the severity of the bulge and the cause of the problem.

Minor bulges: Minor bulges can often be repaired by simply applying a fiberglass patch to the affected area. This is a relatively simple and inexpensive repair that can be done by most do-it-yourselfers.

Major bulges: Major bulges may require more extensive repairs, such as replacing the entire pool wall. This is a more complex and expensive repair that should be done by a qualified pool contractor.

###Preventing wall bulges on fiberglass pools

There are a few things you can do to prevent wall bulges on fiberglass pools, including:

- Have the pool installed by a qualified pool contractor.

- Maintain proper water chemistry.

- Avoid damage to the pool walls.

By following these tips, you can help to ensure that your fiberglass pool will remain in good condition for many years to come.