How to Build a Stud Wall on an Angle

- Studs (2x4s)

- Bottom plate

- Top plate

- Drywall screws

- Circular saw

- Tape measure

- Carpentry pencil

- Level

- Framing square

Instructions

1. Determine the angle of the wall.

2. Cut the bottom plate and top plate to the desired length.

3. Attach the bottom plate to the floor with drywall screws.

4. Use a framing square to make sure the bottom plate is level.

5. Cut the studs to the desired length.

6. Position the studs at the desired angle and attach them to the bottom plate with drywall screws.

7. Use a level to make sure the studs are plumb.

8. Attach the top plate to the studs with drywall screws.

9. Use a level to make sure the top plate is level.

10. Install drywall or other desired finish to the wall.