How to Replace the Roof of a Metal Storage Shed

- New metal roofing panels (check the shed's dimensions and determine how many panels you'll need)

- Roofing nails

- Measuring tape

- Level

- Circular saw

- Screwdriver

- Hammer

- Safety glasses and gloves

Step 2: Remove the Old Roofing Panels

- Start by removing the old metal roofing panels. Begin at one corner of the roof and pry up the panel using a pry bar or crowbar. Continue removing the panels until the entire roof is bare.

Step 3: Inspect the Roof Sheathing

- Once the old roofing panels are removed, inspect the roof sheathing for any damage. If any of the sheathing is rotted or damaged, you'll need to replace it before continuing.

Step 4: Install the New Roofing Panels

- Begin installing the new roofing panels by starting at the lowest corner of the roof. Overlap each panel by about 1 inch and secure it to the roof sheathing using roofing nails.

- Continue installing the new roofing panels, working your way up to the top of the roof. Be sure to overlap each panel by about 1 inch and secure it to the roof sheathing using roofing nails.

- Trim the last panel so it fits properly and secure it to the roof sheathing using roofing nails.

Step 5: Apply Sealant

- Once the new roofing panels are installed, apply sealant around the edges of the panels and any exposed nail heads. This will help prevent leaks.

Step 6: Clean Up

- Once you're finished installing the new roof, clean up any debris and dispose of it properly.

Your metal storage shed should now have a new leak-free roof!