Can Old Shower Panels Be Painted?

_Here's a step-by-step guide on how to paint old fiberglass shower panels:_

1. Cleaning and Preparation:

a. Thoroughly clean the shower panels with a degreaser or a mixture of water and baking soda.

b. Rinse and dry the panels completely.

c. Apply painter's tape around any areas you don't want to paint, such as faucets and grout.

2. Sanding:

a. Lightly sand the panels with fine-grit sandpaper.

b. This helps create a rough surface for better paint adhesion.

c. Make sure not to sand too much as it can damage the fiberglass.

3. Repair Cracks and Damages:

a. If there are any cracks or holes, use a fiberglass repair kit to patch them up.

b. Let the repair dry according to the manufacturer's instructions.

4. Apply Bonding Primer:

a. Apply a coat of bonding primer specifically designed for fiberglass.

b. This primer will promote strong adhesion between the paint and the panels.

c. Allow the primer to dry according to the manufacturer's recommendations.

5. Paint the Panels:

a. Use a paint that is specifically designed for fiberglass surfaces.

b. Apply the paint in thin, even coats.

c. Allow each coat to dry thoroughly before applying the next one.

d. Depending on the paint, you may need to apply two or more coats.

6. Finishing:

a. Allow the final coat of paint to dry completely.

b. Remove painter's tape and touch up any areas that need it.

c. Apply a clear coat sealer to protect the paint from water, scratches, and wear and tear.

d. Let the sealer dry according to the manufacturer's instructions.

_Remember, painting fiberglass shower panels requires attention to detail and the right materials to achieve a durable and aesthetically pleasing result. If you're unsure about any step or don't feel comfortable doing it yourself, consider hiring a professional to ensure a high-quality paint job._